Nowadays, the bridge beam transport vehicles in foreign countries have been quite mature. There are many different types in their forms, but they can be generally divided into the following four types. For example, there are 5000 gallon water tank trailer.
One is a concave bridge beam carrier with a support frame at the bottom. The middle part of the bridge beam frame sinks close to the ground, and the whole is "concave" font. The transport material is directly carried on the support frame at the bottom. Because the beam frame on the side of the load area is very low, it is easier to lift the transport material from the side.
The second is directly carried by the upper part of the main beam concave bridge beam transport vehicle, the overall beam frame shape is similar to the first kind, is "concave" font, but the bottom is completely empty, transport objects side of the bulge directly carried on the upper part of the main beam, through the height of the wither beam can be very convenient loading and unloading. This mode of transport requires a firm supporting area mounted on the side of the object.
The third is the elevated bridge beam transporter. The load area of the beam frame is higher than that of the first two kinds. The hanging belt fixed on the main beam is used to bear the load from the bottom of the transport object. The transport object is basically wrapped in the middle during transportation, and the protection safety of the side is better.
The fourth is the clamp type bridge beam transport vehicle. The two ends of the beam frame is not connected as a whole, but directly fixed at both ends of the transport, which can minimize the weight of the transport vehicle, loading and unloading of goods is more convenient, but this way requires that the transport must have enough strength, and the two ends of the installation has standardized docking interface. This mode is often used to transport very large transformers.
The last 3 of these 4 types are loaded and unloaded safely and quickly without the need of a crane.
There are four types of bridge beam transporters
With the development of industry, especially the booming of pillar industries such as chemical industry, nuclear power and metallurgy, the construction of super-large equipment has become more and more common. Generally, a multi-axle flatbed trailer or SPMT (self-propelled hydraulic flatbed truck) can be used to transport these oversized pieces, but may not be suitable in certain situations, such as when the height is specified for transport. At this time a special kind of transport vehicle should be transported and cattle, they are the bridge beam transport vehicle.
l Introduction to bridge beam Transporter
The basic structure of the bridge beam transport vehicle is the beam frame for connecting the load on the front and rear separated transport module. The transport objects are suspended by the beam frame and "lifted", and the load is transferred to the front and rear multi-axis transport module through the base of the beam frame, so as to realize the load sharing. Because there is no wheel limit below the bearing surface of the beam frame, the height of the overall transport can be controlled very low, or even directly lowered to the ground, which is very advantageous for some occasions where the transport height is required; The loading and unloading of the bridge beam transporter is very convenient and safe, and some kinds can be realized by their own functions even without the aid of lifting equipment; In addition, the split transporter structure is also flexible in steering, even if the body length is very long, it is easy to turn at large angles.
Nowadays, the bridge beam transport vehicles in foreign countries have been quite mature. There are many different types in their forms, but they can be generally divided into the following four types. For example, there are 5000 gallon water tank trailer.
One is a concave bridge beam carrier with a support frame at the bottom. The middle part of the bridge beam frame sinks close to the ground, and the whole is "concave" font. The transport material is directly carried on the support frame at the bottom. Because the beam frame on the side of the load area is very low, it is easier to lift the transport material from the side.
The second is directly carried by the upper part of the main beam concave bridge beam transport vehicle, the overall beam frame shape is similar to the first kind, is "concave" font, but the bottom is completely empty, transport objects side of the bulge directly carried on the upper part of the main beam, through the height of the wither beam can be very convenient loading and unloading. This mode of transport requires a firm supporting area mounted on the side of the object.
The third is the elevated bridge beam transporter. The load area of the beam frame is higher than that of the first two kinds. The hanging belt fixed on the main beam is used to bear the load from the bottom of the transport object. The transport object is basically wrapped in the middle during transportation, and the protection safety of the side is better.
The fourth is the clamp type bridge beam transport vehicle. The two ends of the beam frame is not connected as a whole, but directly fixed at both ends of the transport, which can minimize the weight of the transport vehicle, loading and unloading of goods is more convenient, but this way requires that the transport must have enough strength, and the two ends of the installation has standardized docking interface. This mode is often used to transport very large transformers.
The last 3 of these 4 types are loaded and unloaded safely and quickly without the need of a crane.
Nowadays, the bridge beam transport vehicles in foreign countries have been quite mature. There are many different types in their forms, but they can be generally divided into the following four types. For example, there are 5000 gallon water tank trailer.
One is a concave bridge beam carrier with a support frame at the bottom. The middle part of the bridge beam frame sinks close to the ground, and the whole is "concave" font. The transport material is directly carried on the support frame at the bottom. Because the beam frame on the side of the load area is very low, it is easier to lift the transport material from the side.
The second is directly carried by the upper part of the main beam concave bridge beam transport vehicle, the overall beam frame shape is similar to the first kind, is "concave" font, but the bottom is completely empty, transport objects side of the bulge directly carried on the upper part of the main beam, through the height of the wither beam can be very convenient loading and unloading. This mode of transport requires a firm supporting area mounted on the side of the object.
The third is the elevated bridge beam transporter. The load area of the beam frame is higher than that of the first two kinds. The hanging belt fixed on the main beam is used to bear the load from the bottom of the transport object. The transport object is basically wrapped in the middle during transportation, and the protection safety of the side is better.
The fourth is the clamp type bridge beam transport vehicle. The two ends of the beam frame is not connected as a whole, but directly fixed at both ends of the transport, which can minimize the weight of the transport vehicle, loading and unloading of goods is more convenient, but this way requires that the transport must have enough strength, and the two ends of the installation has standardized docking interface. This mode is often used to transport very large transformers.
The last 3 of these 4 types are loaded and unloaded safely and quickly without the need of a crane.